Universal Carbon Fibre Front Splitter

from $2,950.00

Go Faster Without the Full Custom Cost and Wait

A proper carbon fibre front splitter for drivers who want real front aero without going all the way to a full custom one off design.

Built around our standard Kyatchi Carbon splitter platform, it uses a fixed 590 mm depth, a squared off leading edge to suit a wide range of bumper shapes, and a wing like underside profile developed for front downforce.

The standard size is 1800 mm wide × 590 mm deep.

Need a different width?
Select the custom width option and enter your required width during checkout. The depth stays fixed at 590 mm.

Need a splitter designed specifically for your car, bumper shape, class rules, or want tunnels?
[View our custom splitter here]

294.7 kg of Front Downforce: CFD tested in the standard size at 250 km/h, 50 mm ride height, and 1 degree nose down.
Standard Splitter Platform: Designed to save time and cost compared to a full custom one off splitter.
Optional Custom Width: Choose the standard 1800 mm width, or have the width adjusted to suit your car, setup, or class rules.
Wing Like Underside Profile: Shaping developed to generate real front downforce.
Light and Strong: 6.2 kg in the standard size, giving you a stiff and durable splitter without the weight of bulky plywood setups.
Endplates and Stainless Wear Pucks Included: Comes with endplates for improved aero performance and stainless wear pucks to help protect the splitter from scraping and track abuse.
Hand Crafted in Melbourne

⬇️ The process for getting one made is below

PRICE INC GST

Custom Width:

Go Faster Without the Full Custom Cost and Wait

A proper carbon fibre front splitter for drivers who want real front aero without going all the way to a full custom one off design.

Built around our standard Kyatchi Carbon splitter platform, it uses a fixed 590 mm depth, a squared off leading edge to suit a wide range of bumper shapes, and a wing like underside profile developed for front downforce.

The standard size is 1800 mm wide × 590 mm deep.

Need a different width?
Select the custom width option and enter your required width during checkout. The depth stays fixed at 590 mm.

Need a splitter designed specifically for your car, bumper shape, class rules, or want tunnels?
[View our custom splitter here]

294.7 kg of Front Downforce: CFD tested in the standard size at 250 km/h, 50 mm ride height, and 1 degree nose down.
Standard Splitter Platform: Designed to save time and cost compared to a full custom one off splitter.
Optional Custom Width: Choose the standard 1800 mm width, or have the width adjusted to suit your car, setup, or class rules.
Wing Like Underside Profile: Shaping developed to generate real front downforce.
Light and Strong: 6.2 kg in the standard size, giving you a stiff and durable splitter without the weight of bulky plywood setups.
Endplates and Stainless Wear Pucks Included: Comes with endplates for improved aero performance and stainless wear pucks to help protect the splitter from scraping and track abuse.
Hand Crafted in Melbourne

⬇️ The process for getting one made is below

PRICE INC GST

HOW IT WORKS

Step 1: Check Fitment and Choose Your Size

Before ordering, measure your car to make sure the splitter platform will suit your setup.

The standard size is 1800 mm wide × 590 mm deep. It is designed as a fixed platform to suit a wide range of cars while keeping the cost lower than a full custom one off splitter.

Choose the standard size, or select the custom width option if you need it narrowed or widened to better suit your car, setup, or class rules.

The depth stays fixed at 590 mm.

Need help deciding if it will suit your car? Reach out before ordering and we can help point you in the right direction.

Step 2: We Build It

If the standard size shows as in stock on the website, that means we currently have stock available and ready to go.

Custom width splitters are made to order. Build time is usually at least 2 weeks, depending on the next available production slot and current order queue.

For the most accurate lead time on a custom width order, contact us before ordering.

Step 3: Install

For customers who want the splitter fitted properly from the start, we offer in-house installation at our Melbourne workshop.

Our install is a heavy duty chassis mounted setup designed for track use. The car is set up and levelled on our flat patch, then the splitter is positioned at the correct height and rake while taking ground clearance, vehicle setup and class regulations into account.

From there we design and fabricate a custom tubular chassis mounting system to suit the car. The mounts are cut, notched, test fitted and TIG welded, with structural hardpoints installed into the splitter to suit the final mounting locations. Wheel liners are trimmed and heat protection is added where required.

A custom airdam can also be added once the splitter is installed. This closes the gap between the bumper and splitter, stopping high pressure air from spilling underneath and helping the splitter work more effectively and consistently at speed.

Splitter installation: $3,850 inc GST

[View our Splitter Installation Service →]

Customers can also arrange their own installation through a capable workshop, metal fabricator or experienced DIY customer. For simpler installs, we can also refer customers to trusted installation partners including AeroBall Customs in Braeside and Opulent Garage in Epping.

Mounting brackets and support rods are not included when installation is arranged separately.

Step 4: Carbon Airdam Add On, Optional

For track use, we recommend adding a carbon airdam between the front bar and splitter.

The airdam closes the open gap between the bumper and splitter, helping stop high pressure air from spilling underneath. This helps the splitter maintain a stronger pressure difference and work more effectively and consistently at speed.

The airdam is made to suit the final splitter position and shape of the front bar, then bonded in after the splitter installation is complete.

Carbon Airdam: $950 inc GST

We can also install carbon airdams on site in Sydney, provided the workshop has access to a hoist or high jack stands.

Sydney On-Site Airdam Installation: $1,320 inc GST